5 New cards using the New November 2021 “Yippee” Card Kit

 Hi Everyone 💕

Here are my cards I made using the November “Yippee” card kit.  And I will be using the New A1 card base dies we got for this month.  Mostly Everything I used for these cards you have in the card kit. 

You can find these products here at the Stamps of Life website:  https://thestampsoflife.com/

 Super fun kit. I Love it.  Here is my 1st of 5 cards 💕

This 1st card is a shaker card.

  The sequins I used were the candy cane, citrus fun, and aqua dreams.  

The 3’d ink pen I used was the white pen. Then after the dried I colored them whatever color I wanted them to be.  Mine were yellow and green. All the rest of the flower centers are the blue crystal from the card kit.  If you wanted to use all crystals you could do that instead.  

I cut the “Yippee” die words (3x’s) from blueberry c/s then glued each of them together to get a stack.  I then cut  the background paper from a piece of white glitter paper.  Put glue on the back of my yippee stack and put a large stamping block on top to let dry.  Set aside

Now using your New die set I cut from powdered sugar c/s the card itself and set it aside.  Using one side of that die I used it to cut 1 paper out of poppy c/s.   (On the poppy paper the center line only scores…so I took it to my paper trimmer and cut along the score line).  I then glued it to my powdered sugar card base. 

I then used the smaller rectangle die and cut 1 out of whatever paper u want to be the back side of ur shaker card   

And now I cut the top piece with the vines   I used kiwi c/s  I used the vine die and the rectangle dies tougher so I got an edge around that piece…u need that edge to put ur double sided tape to make it stand up for ur shaker to be able to shake.  This is called foam adhesive on the TSOL site.  NOTE I did not put the foam adhesive on until after I cute the top vine piece…I did not want the vines to stand taller than the acetate.  I ONLY used the foam adhesive around the edges AFTER I adhered the acetate to my kiwi vine paper.   

So here is how it stacked

Kiwi vine paper cut out with edge

I use thin score tape to the underneath side of the kiwi vine paper and then put my acetate upon top of the tape   So it should look like you can look thru it   

I then cut the adhesive sheets into very thin strips and put it all the way around on the acetate (no gapes)

Set aside   

Glue ur patterned paper onto of the poppy c/s  

Now use powder or whatever you use to rub on the paper so the sequins can move around.  Then add ur sequins in the middle of the paper.  

Take you window sheet with the adhesive strips and carefully line it us to the edges all meet perfectly-press down  

To decorate the front of the card I cut blueberry, poppy, cantaloupe, sky and banana flowers using the last die   I then glued them down on top of the kiwi flowers and decorated the centers with the blue crystals or 3 ‘d inks   If you do use the 3’d inks remember to let it dry over nite   

The inside I decorated it with some different colored vines and a saying from Morechalksayings2stamp   

On this card use whatever colors or sayings you want. Super fun card. 

I love this size.  

******

Card #2 A-1 card

Super easy and fast card

Cut 1 A1 card base using the vines and flower extra die from Powdered Sugar c/s  fold on score lines and set aside

Cut 1 piece of licorice c/s  4 13/16” x 3 7/16” 

Cut 1 piece of acetate 4 3/4” x3 3/4” 

Now is the time to color the vines and flowers with ur markers or whatever you use to color with.  Color only to the edge of the powdered sugar paper so it will have a white framed border. 

I used tear and tape to connect the acetate to the top of the licorice c/s edges.  Now is when I connected the licorice to the card base.  When doing that I used tear and tape around the edges and I used gently multi purpose glue to put on the back side of the vines and flowers to connect it to the acetate.  Be sure to not put too much glue,  so it doesn’t leak onto the acetate.  And be sure not to put your licorice and acetate paper to close to the inside fold line.  Just close enough to get a good fold when ur card closes.  You may have to cut off any excess licorice paper if it hangs over the edge 

Now add your sentiment and ur rhinestones and or sequins.  Decorate the inside and add a sentiment. And card #2 is finished.  I know your card is Beautiful 💕💕💕

******

Card #3 A-1 card base

Cut 1 A-1 card base from Powdered Sugar c/s

Using the inside rectangle die cut 1 from powered sugar c/s. Set aside

Now I took the inside rectangle die along with the vines die- centered it evenly and cut it out. Now you should have a vine piece of c/c with the frame around it.  Set it aside

Now go back to the 1st rectangle and using ur blender brush blend all different colors for your background.  After you are done set it aside to dry. 

Next using ur sharp scissors gently and evenly cut the vines away from the edge.  Keep the vines and flowers.  You just want an even cut line.  

Now color all the vines and flowers.  Make sure the colors match your back ground paper you made.   There will be some separates vines and flowers that are still together.  Don’t worry about them going where they were-just start glueing them down onto the paper you created. Try and evenly place them and add flowers where there already is one.  Just make it look pretty.  (I cut some different color flowers to go where the other flowers were).  After the background paper has the vines & flowers add clouds from the kit. (Try and stay away from the edge where ur white frame will be).  Add dimensional tape to pop up your frame and pla e it around you picture.  Then add you sentiment-popped up and ur ribbon & ur hearts.   Now is when you used the 3’d gel, rhinestones or sequins whatever you have for the centers of flowers. 

Set it aside to dry.  

Then connect it to your A1 card base.  

Your card is beautiful 💕

******

Card #4 A-1 card base

This card is made just like card #3.  Super easy to make.  

1 Powdered Sugar A-1 card base using the vine insert.  Score and set aside

Cut 1 piece of vanilla c/s 4 13/16”x 3 7/8”

This will fit inside the card underneath flowers.  Just make sure when you glue these together not to get carried away with the glue. Mostly around the edges and little dots on the vines and flowers will be best. 

Set aside 

Now cut with powdered sugar the flower die. 

Add ur sentiment to your card wherever you want it to go. If you want to pop it up do it now. Then 

go on to adding ur flowers. 

Using the end of a pencil or something that you can press into the center to form the flat  flowers into standing up petals.  Be gentle. I use the eraser end of a pencil and my secret weapon and gently press into the center and that is easy.  After you do this to the flower centers set them aside.  Now cut a piece of kiwi c/s and about 1/4” by 3 inches.  This is how I make leaves.  I cut a ( ) but I connect them at the top and the bottoms to form a leaf.  Make any size you want by just adjusting the width. This is how I get all my leaves the same size.  

Now that you have ur leaves and flowers made go back to you card base and glue on top of each flat  flower a flower and 3 leaves.  

When you feel you have enough you are done with you card. 

Super simple card 

******

Card #5 A2 size card  8 1/2” x4 1/4” score @ 5 1/2” 

This is the only A2 card I made. 

Cut 1 A2 size card base - I used Powdered Sugar c/s

Cut 1 piece of powdered sugar c/s 4” x 5 1/4”

Using masking tape I masked off the colors about 1” apart all the way down the paper.    I used cantaloupe, sunshine, & blueberry.  

I then put TSOL Adhesive on the back of some Powered Sugar c/s and cut the vine and flower die and colored the vines with kiwi, green apple and artichoke.  Save the frame from around it. 

Color the vines and flowers..my vines were green apple, kiwi, and artichoke…my flowers were cantaloupe and strawberry.   It them apart and glue them down onto the top 1/2 of your card.  Then add the flowers.  

Now  the white frame from around the vines and flowers you just cut…  I  colored it strawberry with my TSOL makers.  Lay it down evenly on the front of your paper.  I then added ribbon from ur kit and a bow. Cut out of the paper pad some tiny pockets stamped with “A Little Pocket Hug” and popped it up

 (in between the strawberry border )using dimensional tape.  I triple die cut the word die “Yippee” using TSOL adhesive sheets and put the 3 together for dimension and placed it on top of the ribbon.  Now I added the cloud and the centers to the flowers. I used the blue rhinestone center included in the card kit and 3’d ink pen.  

The inside I decorated it with a pocket some left over flowers and  sentiment from the Pockethugs2stamp set. The little word hug I hand wrote and put it as if it was connected to the pocket.  

Here are my 5 cards from the Yippee card kit.  I hope you post the cards you make so we can all see them.  

    Enjoy 💕

Cheryl

TSOL Design Team November Card Kit Cards

Chris Lawlor  

https://youtu.be/8uqe4YvlEhk

Michelle 

https://instagram.com/cositosbymichelle?utm_medium=copy_link

TSOL’s NEW Smile Fold-it just came out

Smile Fold-it

The New Smile Fold-it has come out and it is on “Flash Sale”.  (Flash sale lasts for 24 hrs or until it sells out). You can find it here:  https://thestampsoflife.com/smile-fold-it-dies.html

Stephanie’s  “Smile Fold-it” video

https://youtu.be/r7d18Tv_gSo

How did I make this.

Super easy card

Using the Fold-it I picked out the colors I wanted to use.

My colors are:

1-Cherry c/s for the fold-it card (largest die) use die on top or side ***look for the words  “place fold here words on die)  to see where to line up your paper  

1- Cherry c/s for the piece on top of the fold-it (largest die)

1-Black piece of c/s for the shadow (2nd largest die)

1- TSOL patterned paper for the letters (letter dies)

After you do all the cutting of your pieces ( you should have 3 pieces of card stock and 5 letters and one dot for the i.  I set the front & back connected paper aside and work on the top pieces -then after I have put the top 2 papers and letters together I glue it to the Fold-it paper   

Cut 1 piece of the c/s to put on the inside to write on   I use the 2nd largest die for the inside it make it smaller   Decorate that paper however you want   I used the llama2stamp stamps.  Glue it down and ur card is done.  Now is when I use the 3’d ink pens (let the ink dry overnight). If you ink the outside and the inside put an stamping block inside to hold it up to dry.

Hope you Enjoy this card. 

 I loved making it.

5 Cards using the “Let it Snow” October 2021 Card Kit club set / TSOL DT Inspiration Card Kit day

 October 2021 DT Inspiration Card Kit Day

By Cheryl Harlan

“Let it Snow” Card Kit Cards 

A2 size card 

***Note -All of my cards are A2 in size 

8 1/2” x 5 1/2” scored at 4 1/4”

1- 8 1/2” x 5 1/2” scored at 4 1/4”  piece of Powdered Sugar c/s.  Using  a Blender brush I inked the edge of the piece to be the front of the card with Grape ink (as dark as you would like) I only ink about 1” all the way around the paper. 

Cut 1 -piece of Blue Jay paper using the largest Stitched rectangle die.  Then using the snowflake stencil I used stencil paste to make snowflakes all the way around the outside edges of the rectangle. (I did not do the middle).  Set aside to dry

Cut 1 piece of grape c/s using the 2nd largest scalloped rectangle dies.  Set aside

*Now we will make a frame. I used the paper from the “Let it Snow” Collection from the kit.  Using the 3rd largest scalloped rectangle and the 5th largest stitched rectangle die line the smaller die in the middle of the scalloped die and put some washi tape (or whatever you use to hole it in place) and run it thru your machine.  Then cut 1 extra of the smaller rectangle angle die (whatever color you want) I used pixie c/s and inked it very lightly using grape and a blender brush.  Then using ur stencil and stencil paste again add some snowflakes to this and set it aside to dry.  

I then stamped and die cut the 3 little snowmen that came in the card kit. (Colored them and added 3’d ink and set aside to dry)

*if you cut out everything all at the same time you can stencil all you pieces at the same time.  Then use your 3’d inks and set them all off to dry.

After everything is stenciled and 3’d inks dried it time to put it together.  The striped ribbon I taped down at the bottom on the back of the paper. I ties a knot but did not tie the bow til the very end.  Layered all the pieces using TSOL’s Adhesive foam.  The last scalloped rectangle I used 2 pieces of the foam so the snowmen piece would sit lower than the frame. Then I added the “Let it Snow”words with glue.and tied the bow. 

***Now for the “Let it Snow” Words.  

First of all use TSOL’s Adhesive sheets on all 4 of these.  Glueing the words would take forever and be messy.   I cut the words out first with the grape paper in the TSOL Color Pearl paper B.  I also cut from powdered sugar just the words 2 time   Then I cut 1 from powdered sugar with the out side word frame.  I then stacked the white letter on top of the white frame and the last was the grape “Let it Snow” words.  I just wanted the words to stand out.  If you don’t  want them to be stacked up then don’t do it   It will be beautiful anyway you do it.  

Once you finish you just put the layers together and you have made my card.  This card is not a hard card it just has a lot of layers  

Enjoy💕

******

Card  #2

A2 size card

8 1/2” x 5 1/2” scored @ 4 1/4”

1- 8 1/2” x 5 1/2” scored @ 4 1/4” of Powdered Sugar c/s

1 piece of 5 1/2” x 4 1/4” Patterned paper from the “Let it Snow” Collection *see note below

*make sure the paper design goes in the correct direction

1- 1” x 5 1/2” patterned paper for side paper ( I used the backside of the candy paper on the front)

Wrap a piece of the Guava striped ribbon around the side paper above.  (I used tape to hold it down on the back side). Add TSOL’s doubled side adhesive down the strip and set aside.   Make also a bow for the front to adhere later.

1- piece of silver glitter paper and 1 piece of grape c/s for the oval. To cut out the frame I used the 2nd largest New Pin Dot Fancy Frames die and from the Dotted Oval dies I used the the 5th largest die to make a frame.  (To make the frame-I use washi tape to adhere the 2 dies together so the oval is centered in the center. make sure ur edges are the same all the way around). Then cut 1 oval out of Grape c/s using the 5th largest die.  When both pieces are cut place them together using a little tape to hold them securely on the back and using TSOL’s Snow stencil and stencil paste I stenciled over the silver glitter paper and the grape oval.  Remove stencil gently and set aside to dry (it doesn’t take long).  Clean your stencil with hot soap and water.  When dry add TSOL’ s foam adhesive and set aside.

Pick out the snowman you want to use from the Patterned paper pad.  Die cut it out.  I added some small dots of white on his scarf.  Using TSOL’s foam mounting tape I cut some stripes and put on the back of the snowman.  Now add him to the center of your grape oval die   Add some Pom poms in the air for him to juggle and set aside to dry.  (I used glue to adhere the Pom poms).  

Now let’s put it together.  Put your patterned paper down and add the side stripe with the ribbon with the foam adhesive.  Then add you snowman with the frame w/ the adhesive so it overlaps onto the ribbon and it doesn’t overhang off the card.  I then added my bow at the bottom.

There you have it. The front is finished.  Glue or tape it down onto the powdered sugar card base.  Now is when I use the 3’d inks.  I used it on the snowman, the stenciled snow, and the ribbon.  But you put it wherever you want.  

The inside was super easy.  I cut 2 pieces of patterned paper the same size.  Glued them down. Cut 3 pf the snow from the dies and glued them down only using glue at the bottom somi could tuck the snowmen down into the snow.  Stamped and colored both of the snowmen included in the card kit.  Add some foam tape to the top only on the snowmen (glued the bottoms of the snowmen into the snow). And added Pom poms and used 3’d ink. 

Really not a hard card. Cut and prep everything and then you just have to put it together.

Enjoy 💕

******

Card #3

A2 size card

1- 8 1/2” x 5 1/2” powdered sugar c/s

1- piece blue glitter paper 4 1/4”x 5 1/2”  using the snow TSOL stencil I used stencil paste and stenciled snow all over the glitter paper.  Set it aside to dry and clean your stencil and your stencil tool.

Using TSOL’s doilie #5 I cut out of powdered sugar the top and blue jay c/s for the shadow. Set aside.

Cut 3 snow drifts from powdered sugar c/s…adhere to the bottom front of the doilie ( glue at the bottom so the snowmens feet will be able to go down into the snow  

Stamp, cut and color 2 little snowmen and using the paper pad die cut out a snowman of your choice.  I added white lines to mine and 3’d ink pen to all 3 of my snowmen.  Set aside to dry.

Tag guava piece is 3” x 1 1/4”m

Green piece is 2 7/8” x 1 1/8”

White piece is 2 3/4” x 1”

Put all together and set aside

I used foam tape to stack up the white and green and glued directly onto the guava paper.  The used 3’d ink and sequins to decorate.

Made 1 guava striped bow

Now put it together…blue glitter paper glued or taped down onto the white c/s.  Added the doilie to the bottom of the card   If any of the snow paper is hanging over the edges gently cut it away from the edges now  add the snowmen to the doilie.  Next add the sentiment to the top with glue or tape…add the bow and add some epoxy dots into the snow   I added some glue to keep the secure 

I stenciled the snow in blue jay ink inside the card and stamped winter wishes from the snowmen stamps.

If you want to add more to it add it now   I added some more sparkle with the CC glitter pen onto the doilie 

Have fun making this card

Enjoy💕

******

Card #4

A2 size card 8 1/2” x 4 1/4” (scored @ 5 1/2”)

1- 8 1/2” x 5 1/2” powdered sugar c/s

1 5 1/2” x 4 1/4” patterned paper from Let it Snow Collection

1- pixie 2nd largest Eyelet scalloped circle die (add adhesive foam to back side)

-

1- powdered sugar paper w/TSOL adhesive added to back of paper use the 3rd largest Eyelet scalloped circle die * add CC spectrum noir glitter pen to this scalloped circle after it is cut - let dry

1 -grape- 2nd largest inside out circle dies ( add foam adhesive to back)

1 white glitter paper 2nd largest inside out circle die- you need only the middle part of the circle (save the outside for another project)

Stamp, die cut and color one small snowman with his arms in the air   (Add foam adhesive to back)

1- 7/16th” x 4 1/4” white glitter paper

Stamp and then Hand cutout 1 “Let is Snow” saying and back face it and hand cut out a shadow.   

Then die cut snowflakes from the Snowglobe2stamp dies.  (As many as you want) in white glitter paper.  The centers I made tiny epoxy dots with my 3’d inks and colored them with guava ink spots.

Now let’s put it together…

On the patterned paper add the large pixie scalloped circle.  Then add the powder sugar scalloped circle.  Next is the grape inside out circle and then glue the white glitter paper  inside part of the circle inside that hole. I used a hole punch and cut little circles to make little balls for the snowman to juggle  you can also use the pompous.  Add some snowflakes onto the grape circle.  Using the white glitter paper on the bottom add some pixie ribbon to the top of it and wrap it around on the sides   Make a bow and add it to the ribbon.  (I used hot glue)  Add some more snowflakes and adhere it to the powdered sugar card base.  The inside is a leftover piece from the front of the card along with the stamp from the card kit “Snowflakes are kisses from heaven”.  I used 3’d ink to make everything sparkle.  

Super fun card to make   Not hard

*******

Card #5

A2 size card

8 1/2” x 5 1/2”

1 piece of 5 1/2” x 4 1/4” powdered sugar c/s

1-frame using the largest 2 stitched rectangle dies (frame made like in card #1)

Using the fireplace2stamp stamps I stamped the fireplace, colored the fireplace with Pool ink and cut it out with the dies.  Add foam adhesive to back & then added 3’d ink and set aside to dry.  

1-Powdered Sugar c/s  3/4” x 1 1/2”  and stamped the word Joy in Grape ink

Used a scrap of pool I made a base for my word JOY  and added it to the Joy c/s glues it all together and added foam adhesive to the back

Made snowflakes from the snow globe set for the stockings.  I cut off the tips of all the snowflakes to make them small enough for the stockings…glued them to the middle and added the little beads from the sequins to the middle.

Stamped the brick of the fireplace and added the fire.  Used the yellow and crystal 3’d inks to make the flame bright.  Glued them onto the fireplace.  Took some TSOL white twine and some epoxy dots to hang the stocking on the fireplace  glued the stockings onto the white twine and added some foam adhesive to the back of the stocking   Now this whole piece can be adhered all at once to the card.  

To put this together add your frame to the Let it Snow paper   Then add your fireplace and to that add ur word Joy   Add some holly from the Holly4Christmas and and “Let It Snow” words on the inside your done.  

I hope you enjoyed all of the cards I made for you for the TSOL’s DT Card Kit inspiration Day

If you make some please tag me so I can see ALL your Beautiful creations  💕

I hope each one of you have a wonderful day💕

Here are links to TSOL Design Team member pages:

Chris Lawlor:  copy and paste into the Instagram browser - www.Instagram.com/Chrislawlor2005 

Dania  https://youtu.be/X8eSNO10Hvc

 Cheryl Harlan: https://instagram.com/Creating_Blessings

 

Have you seen the “New” October 2021 Stamps and Dies by The Stamps of Life?

 Today the “New” October 2021 Snowman 2stamp and die set.  I LOVE it.  Such a fun stamp and die set-but wait there more…there is an add on set that is out of this world cute also.  I will post my cards below and the add insult so you can see them.  You can find these on The Stamps of Life website :

https://thestampsoflife.com/snowmen2stamp.html

Enjoy

5 NEW Cards using the September “Happy Hoiiday” 2021 Card Kit

 Its’s Time for the “5 cards” using The Stamps of Life Card Club Kit

Today I will be posting 5 New cards using the Happy Holiday’s  September  2021 Stamps of Life Card Kit.  This kit goes with the September Hollywreath2stamp  & die club set.  In the Card Kit you receive everything you need to make at least 10 cards but I have made more than 12 before using one kit.  What do you get?  C/S, a 6 “x 6” Patterned Paper Pad, (12) A2 envelopes,  embellishments, stamps that go with that months stamp and die club, and more.  Below I will be posting 5 cards I made using the kit.  AND  “How I made this” card instructions. 

To see this kit you can find it here: https://thestampsoflife.com/

Link to my Instagram : https://instagram.com/Creating_Blessings/

Card #1 

A2 size card 4 1/4” x 5 1/2”  (folded)

Read all the way thru before starting. 

To make this fold-it I cut all my pieces for the fold-it first & then I  started decorating the pieces.  I first did my stenciling on my roof and house front.  Then I made ALL the pieces listed below and set them aside and when I finished I started assembling the front of my housE.  It was really Easy to put together when all the pieces are already done.  Use ur kiss cut pad if you want to.  

To make the door & window:  cut 6 windows…glue 2 windows together at the center then layer the other 4 on top of each other (if you want dimension).  To make the door.  I traced the shadow die to the door on a piece of powdered sugar cardstock.  Then I took a small circle die and matched that circle to the top of the door piece.  If you want it like mine trace it so the corners line up with the circle.    Then cut it out-this makes you a mold to keep for the next one so you can make whatever color door you want. I then cut out a small wreath for the door and the top front of the house from the New Holiday Wishes paper pad.   I used the small wreaths on the Holiday Wishes c/s.  The Tree is made using the tree die from the Truck Fold-it.  I used the tiny bows to decorate the tree along with the mini lites from the Reindeer2stamp. The house lights are from Holly4Christmasstamps.  Tiny hollys are in the Holiday Wishes paper pad.  The Snowflakes are from the Snowflakes background die set. I used the plaid stencil with candy c/s and ink and the grid stencil with mint chip c/s and ink.  Colors are spearmint, strawberry, banana, gingersnap, mint chip, & candy.  I used the 3’d gel pens around the door in pink and white.  Let them dry and colored the white with the red CC alcohol ink.  I used the Spectrum Noir Sparkle cleat pens on the window and snowflakes along with the *3’d ink pens. -see my tip on my 3 ‘d ink pens

Super Easy card and a fun card to make. (Just has A lot of little pieces) 

Enjoy 

*****

Card #2   A2 size card folded

Making this card was Super fast and easy.  You will basically used only things from the card kit.  

Let’s get started:

Using the Holiday Wishes Paper pad I die cut the bow & the wreath from the already colored designs in the paper pad.  I then used my 3’d ink pens to decorate them and make them sparkly. Set aside…I put mine next to a small fan.  I now cut  out the background outlines ( I used white glitter paper) for the bow and the wreath. Use whatever color  you wanted use…I actually used white glitter paper for all the background papers.  I then used the Holiday Wishes dies that came in your kit and cut them out in Spearmint c/s and cut out the background in white glitter paper. I then glued the words to the white glitter paper background.  (set aside)

The Blue Jay cardstock measures (4 1/4” x 5 1/2”)  I stenciled with blue jay ink using the  plaid stencil. I the cut a scalloped frame using the the largest scalloped rectangle and the 2nd largest stitched rectangle together to make a frame to go on top of the plaid paper I made.  I just glued it down to secure it.  Then I added dimensional tape on the back of of my wreath, bow, and words and secured them on top of there background papers. It’s now time to put ur card together.  I put more dimensional tape onto the background paper of the wreath and the bow.   I measured the ribbon and secured it with double sided tape. Then put my wreath in place and added my bow. (I did add some wet glue on the tape so it secured)

Now add your words I did add more dimensional tape with wet glue and put it in place.  The last thing I did was add white 3’d ink pen around the scalloped border.  Set aside and let dry for at least 12 hours.  Decorate the inside and don’t forget to sign ur card.  Super fun and easy card. 

Enjoy

*****

Card #3

A2 size Shaker card 

I used the  #5 & 4 stitched rectangle dies for frame-but make whatever size frame you want.  You just want to have it go right up to the edge. If you want ur frame to be larger just adjust the larger size die. 

This shaker is so easy.  All you need (1) A2 card base, 1 piece of paper 4 1/4”x 5 1/4” to go on top of the A2 base.  (If you want some white edges to show like mine I made my cranberry paper a little smaller).  I took a piece of powder sugar card stock and 1 piece of paper from the paper pad measuring  4 1/8” x 5 1/8” (cut these 2 papers together so your cuts are exactly the same size)  using the rectangle dies (see above)  cut out the center.  Keep the white center paper.  Now cut a piece of acetate to attach to the bottom of the patterned paper.  I use double sided tape.  I then add it to my powdered sugar card so and the acetate is now in between the layers like a sandwich. Add dimensional tape to the underneath side and put some baby powder around the inside of the shaker so ur sequins don’t stick. Powder up the white piece of paper which will fit right in the window of your card. Gently put your sequins in and add the top piece to your card.  Add your frame & your words.  Decorate with 3’d ink pen the little trees, add a ribbon, a bow and some holly from the paper pad. This is a medium hard card.  But if you make everything and then just put it together it’s not that hard.  I love when I can use my dies to cut out the images in the paper pad. 

Enjoy

*****

Card #4  A2 size card (folded)

Holiday wishes card kit

Hollywreath2stamp set

Slimline panel’s snowflake dies

Snowman2stamp stamps and dies

Markers

Green glitter paper

Inks-cranberry, green apple, 

3’d ink pens (glittery one)

Embellishments (Kit)

Papers-powdered sugar and blue jay 

Ribbon (kit)

Make the slimline card as you normally would and use a blue jay for the background paper. 

Using the New stamps and dies in the kits- stamp and die cute the holly and berries. Use 3’d glitter ink to make it sparkle. After it dries put it together and set aside.  Using the snowman2stamp make a snowman-I cut out a wreath from the patterned paper cut it in the back and wrapped it around his neck and glued it in the back. His arms-to make them hold the word I cut off about 1/4” of his arms and glued it outward then glued the rest of his arm onto the bottom piece to make his arm folded inward to hold the sign. Easy peezy.  Stamp color and decorate using the 3 poinsettias-set aside to dry.   Stamp the words on Powdered Sugar c/s and then add dimensional tape and a backing paper if you want.  Add dimensional tape to back of the Powdered sugar words BUT not to the back of the word he is holding…that one gets glued down onto the snowman- and his arms get glued to the flat piece.  Add a small piece of ribbon to the front of the card at the bottom and add the 3 poinsettias. Add your snowman, holly w/berries, 2 words and embellishments.  Make yourself a bow to put at the bottoms of the snowman and start using ur 3’d ink pens to make it sparkly the way you want it.  

Super easy and fun card to make. 

Enjoy

*****

Card # 5 A2 side card

I will list the things you can make ahead and let dry then you can just add them to the card. 

My background paper is sky and seaglass blended 3/4 of the way down the paper. 

1- (1) Elf2stamp color him and add your sparkle to him & put a mini Christmas light in his hands from the kit. You will use 2 snowflakes from the other card for the elf to stand on 

2-The Christmas bulbs from you kit using a hole punch add some twine at the base and at the top and knot both ends…keep them all the same length.  Then decorate them if you want and let them dry.  They will be tied together for the card…so the Length is short maybe 1 1/2”after knotting.  

3-You will need 1 large stitched rectangle paper (mine is Powdered Sugar)  & for the bottom of ur frame to be added just before you secure your frame to the card.   Now to make your frames. I used a large stitched rectangle die and on die that fits inside that die to make a frame.  I used the 6th  largest die for the outside and paired it with the 4th largest die.  Then I made one more stitched rectangle frame.  This is the rectangle you will put on the inside bottom of the frame. I got the size by putting the dies up against the first frame. I wanted it to be small.  Then for the scalloped rectangle I lined up my dies to see which one left the tinyest  scalloped edge.  That’s how I made that edge. But you have to measure after you cut your frame. Then using dimensional tape you can put them all together and add them to ur card. *Remember to put the (1)rectangle down before you secure your frames down

After you attach the frames it’s time to decorate ur card.  The holly and berries in the corners are from the Patterned paper from the kit.  The little Christmas trees 🎄 (I love them) are in the kit AND pull ur  heist as bulb strings together and attach them wherever you want the on the frame- I used double sided tape and a glue dot on the tape to adhere the bow.  Any extra decorating do now and dots with your 3’d ink pens.  

Hope you enjoyed my 5 Card Kit cards I made for you.  I truly enjoy sharing these fun cards with you.  Be sure to Follow me and get “how I did it” tips when they come out.  

Thanks for looking. 

Have a question-just ask I’ll always answer you 💕

Cheryl 

To see the other DT Card videos and cards live you can find them below on September 22nd at 12AM 

Dania’s Doodles

 Here is the link to Dania’s youtube video. 

https://youtu.be/tzDfnUHkpx4

Chris DeLeon Lawlor

Stamps of Life September DT Card Kit Collaboration 5 Cards 1Kit

Here is the link to Chris’s YouTube video

https://youtu.be/Gi3cqZsQBTc 

cositosbymichelle

https://www.instagram.com/p/CUNaP7mALGd/?utm_medium=copy_link

Enjoy 💕